• Park the car on a level surface and turn off the engine.
• Open the hood.
• Locate the turn signal assembly. It is located in the front of the car, on the side where the burned-out bulb is.
• Remove the screws that hold the turn signal assembly in place.
• Pull the turn signal assembly out of the car.
• Twist the bulb counterclockwise to remove it from the socket.
• Insert the new bulb into the socket and twist it clockwise to secure it.
• Reinstall the turn signal assembly and the screws.
• Close the hood.
_Here are some additional tips:_
-To avoid breaking the bulb, do not touch the glass part of the bulb with your fingers.
-When inserting the new bulb, do not push it too hard into the socket.
-Replace the bulb as soon as you notice it is burned out, so that you can avoid being ticketed by the police.
