How do you disable an aftermarket Audiovox alarm system on a Honda Civic EX I cannot find toggle switch or module anywhere and need to know where they are.?

1. Locate the alarm control module. This is usually a small black box with a red or blue LED light on it. It is often installed under the dashboard, behind the glove box, or in the trunk.

2. Disconnect the power. Once you have found the alarm control module, disconnect the power supply. This is usually done by removing the fuse or disconnecting the battery.

3. Find the toggle switch. On some Audiovox alarms, there is a toggle switch that can be used to disable the alarm. This switch is usually located near the alarm control module.

4. Disable the alarm. If there is a toggle switch, simply flip it to the "Off" position. If there is no toggle switch, you may need to reprogram the alarm to disable it. The instructions for reprogramming the alarm should be included in the owner's manual.

5. Test the alarm. Once you have disabled the alarm, test it to make sure it is no longer working. You can do this by trying to arm and disarm the alarm. If the alarm does not sound, then it is successfully disabled.