1. Gather the necessary tools: Here's what you need:
- Replacement parking light bulb
- Phillips-head screwdriver
- Flat-head screwdriver
- Towel or cloth
2. Power Off:
- Turn off the vehicle's engine and allow it to cool down.
- Turn the parking lights switch to the "OFF" position.
3. Access the Headlight Assembly:
- Open the hood of the Toyota Avalon.
- Locate the front side parking light assembly.
4. Remove the Headlight Assembly:
- Using a Phillips-head screwdriver, remove the screws securing the headlight assembly to the vehicle.
- Gently pry the headlight assembly out of its housing, taking care not to disconnect any electrical connectors.
- Place the headlight assembly on the towel or cloth to prevent damage.
5. Remove the Parking Light Bulb:
- Access the parking light socket located at the back of the headlight assembly.
- Turn the parking light bulb counterclockwise to remove it from the socket.
6. Replace the Parking Light Bulb:
- Insert the new parking light bulb into the socket.
- Turn the bulb clockwise until it is secure.
7. Reassemble the Headlight Assembly:
- Carefully guide the headlight assembly back into its housing.
- Secure it with the screws removed in step 4.
8. Test the Parking Light:
- Turn the vehicle's parking lights switch to the "ON" position and check if the new parking light is working.
9. Clean and Secure:
- Use a soft cloth to clean any fingerprints or smudges on the headlight assembly.
- Ensure all electrical connectors are reattached properly.
Close the hood of the Toyota Avalon, and you have successfully replaced the front side parking light.
Note: Refer to your vehicle's owner's manual for specific instructions, especially if the Avalon model you own has variations from this guide.
