1. Gather your tools. You will need:
* A Phillips head screwdriver
* A flat head screwdriver
* A pry bar
2. Open the door.
3. Remove the screws holding the door panel in place. There are four screws: two at the top of the panel, one in the middle of the panel, and one at the bottom of the panel.
4. Remove the plastic clips holding the door panel in place. There are four clips: two at the top of the panel, one in the middle of the panel, and one at the bottom of the panel. Use a flat head screwdriver to pry the clips out of place.
5. Gently pry the door panel off of the door. Start at the bottom corner of the panel and work your way around. Use a pry bar if necessary.
6. Disconnect the electrical connectors behind the door panel. There are two electrical connectors: one for the power window switch and one for the door lock switch.
7. Remove the door panel.
