1. Turn off the engine and release the parking brake.
2. Open the rear hatch of your CR-V.
3. Locate the wiper arm on the rear of the vehicle.
4. Press the tab on the wiper arm and pull it towards you to release it from the wiper blade.
5. Remove the old wiper blade from the wiper arm.
6. Take the new wiper blade and insert it into the wiper arm.
7. Press down on the tab to secure the wiper blade to the wiper arm.
8. Close the rear hatch and test the wiper blade to make sure it works properly.
Here are some additional tips:
- Always use a new wiper blade when replacing the old one.
- If the wiper arm is difficult to move, you can use a penetrating oil to loosen it up.
- Make sure that the wiper blade is properly seated in the wiper arm before closing the rear hatch.
- Test the wiper blade to make sure it works properly before driving away.
