How do you replace the rear windshield wiper on a 2008 Toyota RAV4?

Replacing the Rear Windshield Wiper on a 2008 Toyota RAV4 Step 1: Gather the necessary tools: - Replacement rear windshield wiper blade - Soft cloth - Glass cleaner - Flat-head screwdriver or plastic prying tool Step 2: Prepare your vehicle: - Turn off the engine and engage the parking brake. - Lift the rear hatch to access the rear windshield. Step 3: Remove the old wiper blade: - Locate the wiper arm and the old wiper blade attached to it. - With the soft cloth, gently clean around the base of the wiper blade. This can remove dirt and debris that may interfere with the removal. - Position the flat-head screwdriver or plastic prying tool between the wiper arm and the old wiper blade. You may apply some pressure to gently pry the old wiper blade off the arm. Step 4: Install the new wiper blade: - Once the old wiper blade is removed, slide the new wiper blade onto the wiper arm. Make sure it snaps securely in place. Step 5: Test the wiper blade: - Turn on the rear wiper switch to test the new wiper blade. Ensure it moves smoothly and wipes the glass effectively. Step 6: Clean the rear windshield: - Use a clean, dampened soft cloth and some glass cleaner to wipe the rear windshield and remove any fingerprints or residues left during the replacement. Step 7: Close the rear hatch: - Once you're satisfied with the new wiper blade and cleaned the windshield, close the rear hatch. Congratulations! You have successfully replaced the rear windshield wiper on your 2008 Toyota RAV4. Remember, wiper blade performance can degrade over time, so it's recommended to periodically inspect the condition and replace them when necessary to maintain clear rear visibility while driving.