Preparation:
Park the vehicle on level ground and turn off the engine.
Engage the parking brake to prevent the vehicle from rolling.
Open the hood of the vehicle.
Step 1: Locate the Headlight Bulb:
Locate the headlight assembly on the front of the vehicle.
The headlight bulb is located behind the clear plastic cover on the front of the headlight assembly.
Step 2: Remove the Headlight Cover:
Gently pry the plastic tabs holding the headlight cover in place.
Remove the headlight cover by pulling it straight towards you.
Step 3: Disconnect the Electrical Connector:
Locate the electrical connector attached to the back of the headlight bulb.
Press down on the locking tab of the connector and disconnect it from the bulb.
Step 4: Remove the Old Headlight Bulb:
Turn the old headlight bulb counterclockwise and remove it from the headlight assembly.
Step 5: Install the New Headlight Bulb:
Take the new headlight bulb and align it with the socket in the headlight assembly.
Turn the new bulb clockwise until it is securely in place.
Step 6: Re-connect the Electrical Connector:
Re-connect the electrical connector to the back of the new headlight bulb.
Ensure the connector is securely attached.
Step 7: Replace the Headlight Cover:
Reinstall the headlight cover by inserting the tabs back into the slots in the headlight assembly.
Press the headlight cover until it is firmly secured.
Step 8: Close the Hood:
Close the hood of the vehicle.
Step 9: Test the Headlights:
Turn on the headlights and verify that the new bulb is working properly.
Remember to dispose of the old headlight bulb properly according to local regulations.
