- Philips head screwdriver
- Ratchet
- Socket set
- Pliers
- Wrench
Instructions:
1. Park your vehicle on a level surface and turn off the engine. Engage the parking brake.
2. Open the hood of your car and remove the two upper bolts that secure the front bumper to the body of the car.
3. Crawl underneath the front of the car and locate the two bolts that secure the front bumper to the frame of the car. Remove these two bolts.
4. Remove the two screws that secure the front bumper to the wheel well liners on each side of the car.
5. Use a pry bar to carefully pry the front bumper off of the body of the car. Start at one side and work your way around to the other side.
6. Disconnect the electrical connectors from the fog lights and turn signals if your vehicle has them.
Note: Before you completely remove the bumper from the car, be sure to disconnect any electrical connectors that are attached to it.
Installation:
Installation is the reverse of removal.
1. Start by aligning the bumper with the body of the car.
2. Secure the bumper with the two upper bolts that you removed earlier.
3. Crawl underneath the car and install the two bolts that secure the front bumper to the frame of the car.
4. Install the two screws that secure the front bumper to the wheel well liners on each side of the car.
5. Reconnect the electrical connectors from the fog lights and turn signals if your vehicle has them.
