Locate the two Phillips-head screws on the rear side of the light assembly.
Use a screwdriver to remove the screws.
Once the screws are removed, carefully pry the light cover off of the assembly.
Be careful not to damage the paint on your vehicle.
With the light cover removed, you will see the bulb socket.
Twist the bulb socket counterclockwise to remove it from the assembly.
Remove the old bulb from the socket by gently pulling it straight out.
Insert the new bulb into the socket and twist it clockwise to secure it.
Re-insert the bulb socket into the assembly and turn it clockwise until it clicks into place.
Replace the light cover and secure it with the two Phillips-head screws.
