1. Brake Fluid
a. Find the brake fluid reservoir: It is usually a translucent container with a cap marked "Brake Fluid" or "BF." In most cars, it is located in the engine bay, near the brake master cylinder.
b. Check the fluid level: The reservoir typically has indicators marked "MIN" and "MAX" to indicate the ideal fluid level. Ensure the fluid level is between these marks.
c. Inspect the fluid: The brake fluid should be clear or amber in color. If it appears dark, murky, or has particles, it may need to be changed.
2. Transmission Fluid
a. Locate the transmission fluid dipstick: In many vehicles, the transmission fluid dipstick is near the engine dipstick. It may have a different color handle or be labeled with the word "Trans" or "ATF."
b. Pull out and wipe the dipstick: Take the dipstick out of the transmission fluid reservoir and wipe it clean with a lint-free cloth or rag.
c. Reinsert the dipstick: Put the dipstick back into the reservoir, making sure to insert it fully.
d. Pull out the dipstick again: Take out the dipstick and check the fluid level. It should be between the "MIN" and "MAX" marks on the dipstick.
e. Inspect the fluid: Similar to brake fluid, transmission fluid should be clear or reddish in color. If it's dark or dirty, it may need to be changed.
Note:
Before checking brake or transmission fluid levels, make sure your vehicle is parked on level ground and the engine has been off for long enough to cool down.
If the fluid levels are low or there are any doubts about the condition of the fluids, refer to your vehicle's owner's manual or consult a reliable mechanic to determine if any maintenance or repairs are necessary.
