1. Make sure the new battery is properly installed and connected.
2. Insert the ignition key into the ignition switch and turn it to the "II" position, but do not start the engine. This will power on the radio.
3. Locate the "SET" button on the radio. It is usually a small, round button located on the front panel of the radio.
4. Press and hold the "SET" button until the display screen shows "- - - -". This will clear the radio presets.
5. Use the radio's tuning knob or preset buttons to tune in the desired radio stations.
6. Press the "STORE" button to save the new presets.
7. Turn off the radio and remove the ignition key.
The radio is now reset.
