- Oil filter wrench
- Adjustable wrench
- Penetrating oil
- Rags
- Safety glasses
Here are the steps to remove the stuck oil filter:
1. Prepare the vehicle. Park the van on a level surface and turn off the engine. Allow the engine to cool down completely. Engage the parking brake and chock the wheels. Put on your safety glasses.
2. Locate the oil filter. The oil filter is located on the bottom of the engine, near the oil pan. It is a cylindrical-shaped object with a black cap.
3. Apply penetrating oil. Spray penetrating oil around the base of the oil filter. Allow the penetrating oil to sit for a few minutes to loosen the filter.
4. Use the oil filter wrench. Attach the oil filter wrench to the oil filter. Turn the wrench counterclockwise to loosen the filter. If the filter is still stuck, use the adjustable wrench to help break it loose.
5. Remove the oil filter. Once the filter is loose, remove it by hand. Be careful not to spill any oil.
6. Inspect the oil filter. Check the oil filter for damage. If the filter is damaged, it should be replaced.
7. Install a new oil filter. Apply a thin coat of new oil to the gasket of the new oil filter. Screw the new oil filter onto the oil filter housing. Turn the filter clockwise until it is snug.
8. Fill the engine with oil. Add new oil to the engine. Check the oil level and add more oil if necessary.
9. Start the engine. Start the engine and let it run for a few minutes. Check for any leaks. If there are no leaks, turn off the engine.
10. Clean up. Clean up any spilled oil and dispose of the old oil filter properly.
If you are unable to remove the stuck oil filter, you may need to take your vehicle to a mechanic for assistance.
