1. Turn on the hazard lights.
2. Press and hold the brake pedal for about five seconds until you hear a chime.
3. Release the brake pedal.
4. Turn off the hazard lights.
5. Verify that the brake lights are working properly by pressing the brake pedal and observing that the brake lights illuminate.
Make sure to follow these steps as accurately as possible to ensure that the brake lamp system reset is successful.
Please note that this reset procedure may vary depending on the specific model and year of your Chevrolet Malibu, so it's always a good practice to refer to the owner's manual or consult with a trusted mechanic or automotive professional if you have any doubts or difficulties during the process.
