- Socket set
- Phillips head screwdriver
- Flat head screwdriver
- Jack and jack stands
Instructions:
1.) Begin by parking your Falcon on a level surface and engaging the parking brake.
2.) Pop open the hood and remove the two bolts holding the bumper shock to the hood frame with your socket set.
3.) Use a Phillips head screwdriver to remove the six screws located along the top of the bumper.
4.) Use a flat head screwdriver to pry up the plastic clips that hold the bumper to the car frame.
5.) Have a friend help you lift and remove the bumper from the vehicle.
6.) Installation is the reverse of removal.
Repeat for the other side of the vehicle.
Once you have removed the bumper, you will be able to access the front end of your Falcon for repairs or maintenance.
