Materials Needed:
- New wiper blades (Two matching blades for the driver and passenger sides)
- A clean cloth
- A flat-head screwdriver or a small pry tool (Optional)
Instructions:
1. Park your Corolla in a safe location and turn off the engine.
2. Locate the wiper blades on the front of your vehicle. They are typically made of rubber and located in front of the windshield.
3. Lift the wiper arm up until it is perpendicular to the windshield. This will release the old wiper blade.
4. (Optional Step) Use a small flat-head screwdriver or a small pry tool to assist you in removing the old blade from the wiper arm.
5. Once the old blade is removed, clean the wiper arm with a clean cloth. This will help ensure a good fit for the new blade.
6. Remove the new wiper blade from its packaging.
7. Insert the new wiper blade into the hook or connector on the wiper arm. Make sure that the blade is properly seated in the connector before moving on to the next step.
8. Lower the wiper arm back down until it is parallel to the windshield.
9. Repeat steps 3 to 8 to replace the wiper blade on the passenger side.
10. Test the new wiper blades by turning on the windshield wipers and checking that they are properly clearing the windshield.
By following these steps, you can quickly and easily replace the wiper blades on your 2007 Toyota Corolla. Make sure to replace both blades for optimal performance and driver visibility during inclement weather.
