2. Locate the release lever on the inside of the hatch. The lever is usually located on the lower right-hand side. Pull this lever to release the hatch.
3. Once the hatch is open, you can gently pry it up and remove it.
4. Look inside the rear cargo door and locate the two cables that connect to the latch. These cables are usually black or gray.
5. Use a pair of pliers to disconnect the two cables from the latch. Be careful not to damage the cables.
6. Once the cables are disconnected, you can remove the latch by gently prying it out with a flat-head screwdriver.
7. Clean the latch and the area around it to remove any debris or dirt that may have caused the jam.
8. Replace the latch and reconnect the two cables. Make sure that the cables are securely connected to the latch.
9. Replace the rear hatch and close it.
10. Test the hatch to make sure that it opens and closes properly.
