* A Phillips head screwdriver
* A flat head screwdriver
* A new tail light assembly
1. Park your Echo in a safe location and turn off the engine.
2. Open the trunk of your Echo.
3. Locate the two Phillips head screws that hold the tail light assembly in place.
4. Remove the screws using a Phillips head screwdriver.
5. Use a flat head screwdriver to pry the tail light assembly out of its housing.
6. Disconnect the electrical connector from the tail light assembly.
7. Remove the old tail light assembly from the vehicle.
8. Install the new tail light assembly by reversing the steps above.
Here are some additional tips for replacing the tail lights on a 2000 Toyota Echo:
* Be careful not to drop the tail light assembly when removing it from the vehicle.
* Make sure that the electrical connector is properly connected before reinstalling the tail light assembly.
* Test the tail lights to make sure that they are working properly before driving the vehicle.
