Auto >> AutoSPT >  >> Auto Repair

How do you replace the passenger side view mirror on a 1997 suburban?

Replacing the passenger side view mirror on a 1997 Chevrolet Suburban involves the following steps:

Note: Make sure you have all necessary replacement parts and tools before starting the process.

Step 1: Gather Tools

- Replacement passenger side view mirror

- Phillips head screwdriver

- Flat head screwdriver

- Pliers

- Wrench

Step 2: Remove Interior Mirror Cover

- Locate the interior mirror cover on the door panel.

- Use a flat-head screwdriver to pry off the cover carefully, starting from one corner and working your way around.

- Be gentle to avoid breaking the cover.

Step 3: Disconnect Wiring Harness

- Once the cover is removed, you will see the mirror's wiring harness.

- Disconnect the wiring by pressing on the release tabs and unplugging the connector.

Step 4: Remove the Old Mirror

- Locate the bolts or nuts holding the mirror assembly to the door.

- Use the wrench or pliers to loosen and remove these bolts or nuts.

- Be careful not to drop the bolts or nuts.

Step 5: Unbolt Mirror Housing

- Once the bolts or nuts are removed, gently pull the old mirror housing away from the door.

- Disconnect any remaining wires or cables attached to the mirror, if applicable.

Step 6: Install the New Mirror Housing

- Position the new mirror housing into place, aligning it with the mounting holes on the door.

- Insert the bolts or nuts you removed earlier and tighten them securely.

Step 7: Connect the Wiring

- Reconnect the wiring harness that you disconnected earlier to the new mirror assembly.

- Make sure the connection is secure.

Step 8: Replace Interior Mirror Cover

- Reattach the interior mirror cover by snapping it back into place. Ensure that all the clips engage securely.

Step 9: Test the Mirror

- Adjust the new side mirror to your desired position.

- Start the Suburban and test the mirror's controls, including the power adjustment and defroster (if equipped).

Remember to dispose of the old mirror properly. If you encounter any difficulties during the process, it is recommended to seek help from a qualified mechanic or refer to your vehicle's repair manual for specific instructions applicable to your exact Suburban model.