- Phillips head screwdriver
- Flat head screwdriver
- Socket set
- Ratchet
- Wrench
- Jack
- Jack stands
- Pry bar
- New bumper cover
Instructions:
1. Park the car on a level surface and turn off the engine.
2. Engage the parking brake.
3. Jack up the car and support it on jack stands.
4. Remove the rear wheels.
5. Remove the mud flaps (if equipped).
6. Remove the eight bolts that secure the bumper cover to the car.
7. Use a pry bar to carefully pry the bumper cover off of the car.
8. Remove the old bumper cover.
9. Install the new bumper cover.
10. Replace the bolts that secure the bumper cover to the car.
11. Reinstall the mud flaps (if equipped).
12. Lower the car off of the jack stands.
13. Reinstall the wheels.
14. Note: You may need to adjust the bumper cover to ensure that it is properly aligned.
