1. Park the vehicle in a safe location and turn off the engine.
2. Open the hood and disconnect the negative battery terminal.
3. Remove the floor mats and the plastic trim from around the clutch pedal.
4. Locate the clutch master cylinder and remove the two nuts that hold it to the firewall.
5. Remove the clutch slave cylinder from the transmission and remove the clutch line.
6. Locate the clutch pedal assembly and remove the bolts that hold it to the floorboard.
7. Remove the clutch pedal assembly from the vehicle.
8. Reinstall the clutch pedal assembly in reverse order of removal.
9. Reconnect the negative battery terminal and start the engine.
10. Test the clutch pedal to make sure it is working properly.
