Tools and Materials Needed:
- Replacement Driver's Side Mirror
- Phillips-head screwdriver
- Flat-head screwdriver
- Pliers
Instructions:
1. Remove the Interior Door Panel:
- Start by removing the interior door panel of your Isuzu Hombre.
- Insert the flat-head screwdriver into the gap between the panel and the door and gently pry it off, working your way around the panel until it is completely removed.
2. Disconnect Electrical Connections:
- Once the door panel is removed, you will see the back of the mirror housing and the electrical connector for the power mirror switch.
- Disconnect the electrical connector by pressing down on the locking tab and pulling the connector apart.
3. Remove Mirror Housing Bolts:
- Inside the door panel, you will find the mounting bolts that secure the mirror housing.
- Use a Phillips-head screwdriver to loosen and remove these bolts.
4. Remove Mirror Housing:
- Once the bolts are removed, you can gently pull the mirror housing out from the door.
5. Transfer Components to New Housing:
- If your new mirror housing does not include components such as the power mirror switch or the defrost connector, you will need to transfer them from your old mirror housing to the new one.
- Carefully remove these components and reinstall them in the new housing.
6. Mount New Mirror Housing:
- Place the new mirror housing in place, aligning the mounting holes.
- Insert and tighten the mounting bolts that you removed earlier.
7. Reconnect Electrical Connections:
- Reconnect the electrical connector that you disconnected earlier.
8. Test Mirror:
- Test the functionality of the new mirror by adjusting it using the power mirror switch.
9. Reinstall Interior Door Panel:
- Reinstall the interior door panel by aligning it with the door frame and pressing firmly until the clips engage.
10. Final Checks:
- Perform a final check to make sure the mirror is securely installed and all electrical connections are secure.
That concludes the process of replacing the driver's side mirror on your 1997 Isuzu Hombre. Remember, if you encounter any difficulties or uncertainties during the replacement, it's best to consult with a professional mechanic.
