-10mm socket
-Phillips head screwdriver
-Flat head screwdriver
-Pliers
Instructions:
1. Open the hood of your Sienna and remove the four screws that hold the upper grille in place.
2. Once the screws are removed, pry up on the upper grille to remove it.
3. Remove the two bolts that hold the bumper cover to the front fenders.
4. Remove the two screws that hold the bumper cover to the inner fender wells.
5. Pull the bumper cover forward to disengage it from the clips that hold it in place.
6. Once the bumper cover is free, disconnect the fog light harnesses and the license plate light harness.
7. Remove the bumper cover from the vehicle.
To reinstall the front bumper cover, simply follow the steps in reverse order.
Tips:
-Be careful when prying up on the upper grille as it can be fragile.
-Make sure to disconnect all of the electrical harnesses before removing the bumper cover.
-Have a helper assist you when removing and installing the bumper cover as it can be heavy.
