1. Check the Brake Fluid:
- Low brake fluid levels can cause the brakes to feel spongy and can lead to problems disengaging the parking brake.
- Check the brake fluid reservoir, and if it's low, top it up with the recommended brake fluid as specified in your vehicle's owner's manual.
2. Inspect the Parking Brake System:
- There may be a mechanical issue with the parking brake mechanism itself, such as a stuck cable or a problem with the brake caliper.
- Have the parking brake system inspected by a qualified mechanic or technician who can identify the root cause and make necessary repairs.
3. Calibrate the Brake Sensors:
- If your vehicle has electronic brake sensors, there might be a calibration issue causing the brakes to behave unexpectedly.
- Refer to your vehicle's owner's manual or consult with a mechanic to learn about the specific calibration procedures for your vehicle's brake sensors.
4. Examine Braking Components:
- Worn brake pads or rotors, misaligned components, or issues with the brake calipers or master cylinder can also affect brake release.
- Have the entire braking system inspected, and replace or repair any faulty components if needed.
5. Check the Parking Brake Lever:
- Make sure that the parking brake lever is fully disengaged and not stuck in the engaged position.
- Try moving the lever up and down several times to ensure it's not obstructed or stuck.
Remember that brake issues can be dangerous, so it's important to address them promptly. If you're unsure about inspecting and repairing brakes on your own, I recommend taking your vehicle to a trusted mechanic or service center to diagnose and fix the problem accurately and safely.
