* Jack and jack stands
* Lug wrench
* Socket set
* Flywheel replacement kit
* Gasket sealant
Instructions:
1. Park your car on a level surface and engage the parking brake.
2. Use the jack to raise the rear end of the car until the wheels are off the ground.
3. Place jack stands under the car to support it.
4. Remove the lug nuts and wheels from the rear axles.
5. Remove the transmission oil pan.
6. Remove the flywheel cover.
7. Remove the old flywheel.
8. Clean the flywheel mating surfaces.
9. Apply gasket sealant to the new flywheel.
10. Install the new flywheel.
11. Replace the flywheel cover.
12. Reinstall the transmission oil pan.
13. Replace the wheels and lug nuts.
14. Lower the car.
Note: Always refer to a workshop manual for your specific car model for proper disassembly and assembly instructions. It's also recommended to follow the torque specifications for all nuts and bolts when re-installing them.
