1. Disconnect the battery.
2. Remove the transmission crossmember.
3. Remove the starter.
4. Remove the flywheel housing cover.
5. Remove the pressure plate bolts and remove the pressure plate and clutch disc.
6. Inspect the flywheel and replace if necessary.
7. Install the new clutch disc and pressure plate.
8. Tighten the pressure plate bolts to the specified torque.
9. Install the flywheel housing cover.
10. Install the starter.
11. Install the transmission crossmember.
12. Connect the battery.
13. Test drive the vehicle to ensure the clutch is working properly.
