The process for replacing the clutch on a 2.0L Ford Probe 16v is as follows:
1. Prepare the car. This involves raising it off the ground using jack stands, and removing the transmission from the car.
2. Remove the old clutch. The clutch will be held in place by a series of bolts, which will need to be loosened and removed. Once the bolts are removed, the clutch can be unbolted from the flywheel.
3. Install the new clutch. The new clutch should be bolted to the flywheel in the reverse order of the removal process.
4. Reinstall the transmission. The transmission should be bolted back onto the engine and the driveshaft should be reattached.
5. Test the new clutch. The new clutch should be tested by driving the car around. If the clutch is slipping or chattering, it will need to be adjusted or replaced.
The time required to complete this process will vary depending on the experience of the mechanic and the tools that are available. However, it should take approximately 4-5 hours to complete.
