Step 1: Locate the Air Cabin Filter Housing
- Open the front passenger side door of your GMC Envoy Denali.
- Look under the dashboard on the passenger side. You'll see a black plastic housing with the words "Air Filter" written on it.
Step 2: Remove the Old Air Cabin Filter
- Open the air cabin filter housing by pressing the tabs on either side of the cover and pulling it down.
- Remove the old air cabin filter by gently pulling it out of the housing.
Step 3: Clean the Air Cabin Filter Housing
- While you have the air cabin filter housing open, take the opportunity to clean any dust or debris that has accumulated inside.
- You can use a vacuum cleaner with a brush attachment for this purpose.
Step 4: Install the New Air Cabin Filter
- Insert the new air cabin filter into the housing with the arrows pointing towards the front of the vehicle.
- Make sure the filter is seated properly and fully inserted into the housing.
Step 5: Close the Air Cabin Filter Housing
- Once the new air cabin filter is in place, close the housing by pressing it back into place until you hear a click.
- Ensure the housing is properly closed to prevent air from bypassing the filter.
That's it! You've successfully replaced the air cabin filter in your 2006 GMC Envoy Denali. It's a simple and important maintenance task that can help improve the air quality inside your vehicle.
It is recommended that you replace the air cabin filter every 12,000 to 15,000 miles, or once a year, whichever comes first. However, if you drive in dusty or polluted areas, you may need to replace it more frequently.
