- Philips head screwdriver
- Flat head screwdriver
- 10mm socket wrench
- Ratchet
- Jack stands (or ramps)
Instructions:
1.) Park your Suzuki Sidekick on a level surface and apply the parking brake.
2.) Disconnect the negative battery terminal. This will prevent the car from starting while you're working on the bumper cover.
3.) Locate the four bolts that hold the bumper cover to the fender liner. Two bolts are located on each side of the vehicle.
4.) Remove the four bolts with a 10mm socket wrench and ratchet.
5.) Locate the two bolts that hold the bumper cover to the grille.
6.) Remove the two bolts with the 10mm socket wrench and ratchet.
7.) Unsnap the bumper cover from the clips that hold it to the body of the vehicle. There are four clips on each side of the vehicle.
8.) Gently pry the bumper cover away from the body of the vehicle until it pops off.
9.) Remove the bumper cover from the vehicle.
Tips:
- If you have difficulty removing the bumper cover, you can use a flat head screwdriver to pry the clips loose.
- Be careful not to damage the paint on your car when removing the bumper cover.
