- New wiper blades (2)
- Soft cloth
- Rubbing alcohol
- Phillips head screwdriver (optional)
Instructions:
1. Park your Hummer H2 in a safe location and turn off the engine.
2. Locate the wiper blades on your Hummer H2. They are located on the front and rear of the vehicle.
3. Press the release tab on the wiper blade assembly and lift the wiper blade off of the windshield.
4. Clean the wiper blade assembly with a soft cloth and rubbing alcohol. This will remove any dirt or debris that may be on the assembly and help the new wiper blades work more effectively.
5. If the wiper blade assembly is damaged or worn, you may need to replace it before installing the new wiper blades. To do this, use a Phillips head screwdriver to remove the screws that hold the assembly in place and lift it off of the vehicle.
6. Install the new wiper blades by sliding them onto the wiper blade assembly until they click into place.
7. Test the new wiper blades by spraying water onto the windshield and turning on the wipers. Make sure that the new wiper blades are working properly and clearing the windshield of water.
