1. Park the car on a level surface and turn off the engine.
2. Open the hood and locate the clutch cable. It is a long, thin cable that runs from the clutch pedal to the transmission.
3. Find the clutch cable adjuster. It is a small, black plastic piece located near the transmission.
4. Turn the clutch cable adjuster clockwise to tighten the clutch cable. This will increase the amount of pressure applied to the clutch disc, making it engage more firmly.
5. Turn the clutch cable adjuster counterclockwise to loosen the clutch cable. This will decrease the amount of pressure applied to the clutch disc, making it engage more smoothly.
6. Test the clutch by pressing down on the clutch pedal. The pedal should feel firm and should engage smoothly without slipping.
7. If necessary, make further adjustments to the clutch cable until the desired feel is achieved.
8. Once you are satisfied with the adjustment, close the hood and start the car.
9. Test drive the car to ensure that the clutch is engaging properly.
