1. Chock the front wheels and engage the parking brake.
2. Raise and support the rear of the vehicle with jack stands.
3. Remove the rear wheels.
4. Remove the caliper bolts and remove the caliper from the rotor.
5. Unscrew the bleeder screw on the caliper and allow the brake fluid to drain.
6. Use the brake caliper tool to turn in the caliper piston as far as it will go.
7. Reinstall the caliper and pads, and tighten the caliper bolts.
8. Reinstall the wheels and lower the vehicle.
9. Top off the brake fluid reservoir and test the brakes for proper operation.
