1. Disconnect the battery: Before starting any work, disconnect the negative terminal of the battery to avoid any electrical accidents.
2. Remove the seat belt: Unbolt the seat belt from the floor and the B-pillar.
3. Remove the seat back: There are two bolts that hold the seat back in place. Remove these bolts and carefully lift the seat back out of the vehicle.
4. Slide the seat forward: Slide the seat all the way forward to access the front bolts.
5. Remove the front bolts: There are four bolts that hold the seat to the floor. Remove these bolts.
6. Slide the seat back: Slide the seat all the way back to access the rear bolts.
7. Remove the rear bolts: There are two bolts that hold the seat to the floor. Remove these bolts.
8. Lift the seat out: Once all the bolts are removed, you should be able to lift the seat out of the vehicle.
Note: Be cautious when lifting the seat, as it can be heavy. It's a good idea to have someone assist you with this step.
Installation is the reverse of removal. Make sure to securely fasten all bolts and reconnect the seat belt before driving the vehicle.
