Tools and Materials Needed:
* Phillips head screwdriver
* Flat head screwdriver
* 10mm socket wrench
* New headlight assembly
* Replacement bulbs (if needed)
Instructions:
1. Open the hood of your Sport Trac.
2. Locate the two Phillips head screws on the top of the headlight assembly. Remove these screws.
3. Use a flat head screwdriver to pry the plastic trim piece away from the headlight assembly. This will expose the electrical connectors for the headlight.
4. Disconnect the electrical connectors from the headlight assembly.
5. Use a 10mm socket wrench to remove the four bolts that hold the headlight assembly in place.
6. Once the bolts are removed, carefully remove the headlight assembly from the Sport Trac.
7. Transfer the bulbs from the old headlight assembly to the new one, if necessary.
8. Reverse the steps above to install the new headlight assembly.
_Tips:_
- _Turn off the headlights before replacing the assembly,_
- _Take photos during disassembly to make reassembly easier_,
- _Wear safety glasses and gloves and work in a well-lit area to protect yourself from falling tools_
