1. A breaker bar
2. A deep socket
3. A ratchet
4. A piece of wood or metal
5. A hammer
Steps:
1. Park your car on a flat surface and apply the parking brake.
2. Disconnect the negative terminal from the battery.
3. Disconnect the belt cover.
4. Remove the radiator cap.
5. Remove the crankshaft pulley bolt cover.
6. Insert the breaker bar into the deep well of the socket and push it down until it is seated against the bolt.
7. Place the piece of wood or metal between the breaker bar and the frame of the car.
8. Use the hammer to strike the wood or metal, which will help to loosen the bolt.
9. Once the bolt is loose, use the ratchet to remove the bolt completely.
10. Reinstall the bolt in reverse order of the removal process.
11. Tighten the bolt to the specified torque setting using a torque wrench.
