Tools and Materials Needed:
1. New Passenger-side mirror (matching your vehicle's model and year)
2. Small flat-head screwdriver
3. Phillips-head screwdriver
4. 7mm wrench
5. Replacement bolts (if necessary)
Step-by-Step Procedure:
1. Remove the door panel:
1. Begin by removing the plastic cover on the door handle using the small flat-head screwdriver.
2. Remove the two Phillips-head screws exposed within the handle cover.
3. Use the small flat-head screwdriver to pry open the plastic caps near the door lock and window crank mechanisms.
4. Remove the screws exposed behind these caps.
5. Gently pry the door panel upwards, starting from the bottom, to release the plastic clips that hold it in place.
6. Disconnect any wiring harnesses attached to the door panel (for power windows or locks, if equipped).
7. Set aside the door panel in a safe place.
2. Locate the mirror mounting bolts:
1. Once the door panel is removed, you'll be able to see the backside of the passenger-side mirror.
2. Locate the three 7mm bolts that attach the mirror to the door.
3. Remove the old mirror:
1. Use the 7mm wrench to loosen and remove the three mounting bolts.
2. Carefully remove the old mirror from the vehicle.
4. Install the new mirror:
1. Place the new side mirror in position, aligning the mounting holes with the bolts on the door.
2. Insert the mounting bolts and tighten them using the 7mm wrench.
5. Reattach the door panel:
1. Reconnect any wiring harnesses that were disconnected during the removal of the door panel.
2. Carefully align the plastic clips on the door panel with their corresponding slots on the door frame.
3. Gently press down on the panel to snap the clips into place.
4. Replace the screws you removed earlier to secure the door panel.
5. Reattach the plastic covers and caps you removed at the beginning of the process.
6. Test the new mirror:
1. Adjust the new mirror to ensure it provides an optimal view.
Remember, this is a general guide and specific details may vary depending on your exact model and trim level. If you encounter any uncertainties or difficulties during the replacement process, it's best to consult your vehicle's service manual or seek assistance from a qualified mechanic.
