1. Eyeglass repair kit
2. Small screwdriver
3. Needle-nose pliers
Detailed instructions:
1. Begin by thoroughly washing and drying the eyeglasses.
2. Assess the damage. Determine if the frame is broken, the lens is loose or the hinge needs to be tightened.
3. Open the eyeglass repair kit. Usually, the kit contains multiple screws and a bottle of adhesive.
4. If the eyeglasses have a loose screw or hinge, use a small screwdriver to hold or slightly turn it until the right tightness is achieved.
5. In case of a frame break or loose parts, apply adhesive on both sides of the joint.
6. Position the loose part accurately on the frame and let it set till it dries up completely.
7. Once the adhesive has set, use a clean cloth to remove excess glue and polish the eyeglasses.
8. For loose or missing nose pads, use the adhesive as mentioned earlier. Make sure to place them in the right position and let it dry completely.
9. After all the repairs are done, give the eyeglasses a final wipe with a clean, dry cloth and allow enough time for the adhesive to set completely before wearing them again.
Here are some additional tips for using an eyeglass repair kit:
- Be sure to use the right type of adhesive for your eyeglasses. Some adhesives are not suitable for plastic frames.
- Apply the adhesive sparingly. Too much adhesive can make the eyeglasses look messy and can weaken the bond.
- Hold the parts together firmly until the adhesive has set.
- If you're not confident in your ability to repair your eyeglasses, you can take them to an optician.
