1. Park the tractor on a level surface and apply the brakes.
2. Engage the parking brake lever.
3. Locate the parking brake linkage under the tractor.
4. Disconnect the linkage from the parking brake lever.
5. Remove the cotter pin from the clevis pin that holds the parking brake linkage in place.
6. Remove the clevis pin and slide the parking brake linkage off the tractor.
7. Reinstall the cotter pin in the clevis pin hole to secure the parking brake lever.
8. Test the parking brake lever to ensure that it is working properly.
Here are some additional tips for removing the John Deere tractor parking brake:
* Make sure that the tractor is parked on a level surface and the brakes are applied. This will help to prevent the tractor from rolling while you are working on it.
* Be careful not to lose any of the small parts that are involved in the parking brake linkage. These parts can be easily lost if they are not kept track of.
* If you are not comfortable working with the parking brake linkage, you can always take your tractor to a qualified repair shop to have the work done.
