Changing brake pads on a 1991 Ford F-150 is a relatively easy task that can be completed in about an hour. Here are the steps involved:
1. Gather your tools and materials. You will need:
>* New brake pads
* C-clamp or brake caliper tool
* Socket wrench set
* Flat-head screwdriver
*Safety glasses
*Wheel chocks
*Jack and jack stands
2. Park your truck on a level surface and apply the parking brake. Chock the wheels to prevent the truck from rolling.
3. Jack up the truck and place it on jack stands. Be sure to use jack stands that are rated for the weight of your truck.
4. Remove the lug nuts from the wheels and take off the wheels.
5. Use the C-clamp or brake caliper tool to compress the brake caliper piston. This will allow you to remove the old brake pads.
6. Remove the old brake pads from the caliper. Be careful not to damage the caliper or the brake rotor.
7. Clean the brake caliper and rotor with a brake cleaner. Be sure to remove any dirt, debris, or old brake fluid.
8. Apply a small amount of brake grease to the back of the new brake pads. This will help to prevent them from squeaking.
9. Install the new brake pads into the caliper. Be sure to align the brake pads with the rotor.
10. Use the C-clamp or brake caliper tool to compress the brake caliper piston. This will allow you to install the new brake pads.
11. Replace the lug nuts and wheels.
12. Lower the truck off the jack stands.
13. Test the brakes before driving the truck. Be sure to apply the brakes slowly and gradually to allow them to bed in properly.
14. Repeat steps 5-13 for the other side of the truck.
