1. Park your car in a safe location and turn off the engine.
-Ensure the parking brake is engaged.
2. Open the hood of your car.
- Locate the release lever inside the driver's footwell and pull it to release the hood.
3. Locate the turn signal bulb.
- To locate the turn signal bulb, look for a small plastic cover located in the front of the headlight assembly.
4. Remove the bulb cover.
- To remove the bulb cover, simply pry it off using a flat-head screwdriver. Be careful not to damage the cover.
5. Remove the old turn signal bulb.
- Once the cover is removed, you will see the old turn signal bulb.
- To remove the bulb, turn it counterclockwise and pull it out of the socket.
6. Insert the new turn signal bulb.
- Take the new bulb and insert it into the socket.
- Turn the bulb clockwise until it is secure.
7. Replace the bulb cover.
- Once the new bulb is in place, replace the bulb cover.
- Press down on the cover until it snaps into place.
8. Close the hood of your car.
- Once the bulb is replaced, close the hood of your car.
9. Test the turn signal.
- Turn on your hazard lights to make sure the new bulb is working properly.
