1. Park your car in a safe and well-lit area. Turn off the engine and allow it to cool down.
2. Open the trunk of your car.
Locate the two plastic plugs that hold the license plate light housing in place. They are located on either side of the license plate light.
3. Use a flat head screwdriver to pry open the plastic plugs.
Be careful not to damage the plugs or the surrounding paint.
4. Once the plugs are removed, gently pull the license plate light housing out of the trunk.
5. Disconnect the electrical connector from the back of the license plate light housing.
6. Replace the old license plate light bulb with a new one.
Be sure to use the correct type of bulb for your vehicle.
7. Reconnect the electrical connector to the back of the license plate light housing.
8. Slide the license plate light housing back into the trunk.
9. Replace the plastic plugs that hold the license plate light housing in place.
10. Close the trunk of your car.
