1. Prepare your tools. You will need a 10mm socket wrench, a ratchet, and a flat-head screwdriver.
2. Locate the ignition pack. The ignition pack is located on the top of the engine, near the front of the car. It is a black plastic box with four electrical connectors.
3. Disconnect the electrical connectors. Use the 10mm socket wrench to loosen the bolts that hold the electrical connectors in place. Then, pull the connectors off of the ignition pack.
4. Remove the ignition pack. Use the flat-head screwdriver to pry the ignition pack up off of the engine. Be careful not to damage the ignition pack or the surrounding components.
5. Inspect the ignition pack. Look for any signs of damage, such as cracks or broken wires. If the ignition pack is damaged, it will need to be replaced.
6. Install a new ignition pack. If the ignition pack is not damaged, you can reinstall it by following the steps in reverse order.
