Note: Do not open the door or step on the brake pedal before disconnecting the battery.
1. Unplug the black, negative battery cable.
- You should always disconnect the negative terminal first, as this will help to protect you and your vehicle from electrical shocks.
2. Wait for approximately five minutes.
- Give the computer time to depower and reset.
3. Reconnect the black, negative battery cable.
- Do not reconnect the positive battery terminal yet.
4. Turn on the ignition and crank but do not start the vehicle.
- This step is essential for resetting the computer and clearing any codes.
5. Turn the ignition key back off.
6. Reconnect the positive battery cable.
- If you hear clicks, sparking or smoke, stop immediately and seek help from a professional.
7. Start the vehicle.
- Check if the issue has cleared and the car starts as usual.
8. Test drive the vehicle.
- Drive for at least 15 minutes to verify proper functioning of the car.
Note: If the computer was reset with the correct procedure and the issue persists, you may need to take the car to a professional.
Warning: Before performing any work on your vehicle's electrical system, it is important to understand the risks and take the necessary safety precautions. If you are not qualified to work on your vehicle, it is recommended to consult a professional.
