- Use a Torx T30 screwdriver to loosen the two screws holding the door handle retainer in place.
- Remove the retainer and set it aside.
- Once the retainer is removed grip the door handle and firmly pull it straight out.
- Disconnect the electrical connector behind the door handle by pressing the release tab.
2. Remove the window switch panel.
- Pry off the plastic cover on the front of the door armrest using a flathead screwdriver.
- Remove the two Phillips-head screws holding the window switch panel in place.
- Disconnect the electrical connectors behind the window switch panel.
3. Remove the door lock knob.
- Pull up on the plastic cover on the front of the door lock knob to remove it.
- Remove the Phillips-head screw holding the door lock knob in place.
4. Pry off the door panel.
- Starting at the bottom of the door panel insert a pry tool between the door panel and the door and with force pop the panel clips loose.
- Work your way around the door panel carefully popping the rest of the panel clips loose.
- Once all the panel clips are popped open lift the door panel straight up to remove.
5. Disconnect any electrical connectors.
- Disconnect the remaining electrical connector behind the door panel if there are any.
6. Remove the door panel.
- Remove the old door panel from the vehicle.
