Materials Needed:
1. Replacement right-side repeater
2. Flat-head screwdriver
3. Phillips-head screwdriver
Step 1: Remove the outer casing.
a. Insert the flat-head screwdriver into the small gap between the outer casing and the side mirror housing.
b. Gently pry the outer casing loose and detach it from the housing.
Step 2: Remove the damaged repeater.
a. Locate the damaged repeater attached to the side mirror housing.
b. Use the Phillips-head screwdriver to loosen and remove the screws that secure the repeater to the housing.
c. Disconnect the wiring harness from the damaged repeater.
Step 3: Connect the new repeater.
a. Plug in the wiring harness into the new repeater.
b. Align the new repeater with the screw holes on the side mirror housing.
Step 4: Secure the new repeater.
a. Use the Phillips-head screwdriver to insert and tighten the screws that secure the new repeater to the housing.
Step 5: Reattach the outer casing.
a. Align the outer casing with the side mirror housing, ensuring it fits snugly.
b. Gently push the outer casing back into place until it clicks securely.
Step 6: Test the repeater.
a. Turn on the vehicle's headlights and hazard lights.
b. Check if the newly installed right side repeater is functioning properly and flashing.
Once you've completed these steps, the right-side repeater on your 2000 Jaguar S-Type should be successfully repaired and working as expected.
