- A 5/16" Allen wrench
- A 1/4" socket wrench
- A 3/8" socket wrench
- A torque wrench
- A flat-blade screwdriver
- A Phillips-head screwdriver
The steps for changing the speed sensor are as follows:
1. Disconnect the battery.
2. Remove the derby cover.
3. Remove the starter clutch.
4. Remove the speed sensor.
5. Install the new speed sensor.
6. Install the starter clutch.
7. Install the derby cover.
8. Reconnect the battery.
Here are some additional tips for changing the speed sensor on a 2005 Harley Fatboy:
- Be sure to use the correct size tools.
- Do not over-tighten the bolts.
- Be careful not to damage the speed sensor.
- If you are uncomfortable with any of the steps involved in this procedure, it is best to consult a professional motorcycle mechanic.
