1. Disconnect the negative battery terminal. This will help to prevent any electrical accidents while you're working on the seat.
2. Locate the four bolts that hold the seat to the floor. There will be two bolts in the front and two bolts in the rear.
3. Remove the front bolts. You will need to use a 15mm socket to do this.
4. Remove the rear bolts. You will need to access these bolts from underneath the car. You can do this by either crawling under the car or using a floor jack.
5. Lift the front of the seat up and off of the floor.
6. Disconnect the electrical connectors that are attached to the seat. There will be two connectors, one for the seat heater and one for the power seat adjuster.
7. Slide the seat out of the car.
To reinstall the driver's seat, simply follow these steps in reverse order.
