* Jack and jack stands
* Wrench set
* Socket set
* Screwdriver
* Pliers
* Clutch alignment tool
Procedure:
1. Park the car on a level surface and engage the parking brake.
2. Raise the front of the car with the jack and support it on jack stands.
3. Remove the front wheels.
4. Remove the brake calipers and rotors.
5. Remove the driveshaft.
6. Remove the starter motor.
7. Remove the transmission bell housing bolts and remove the bell housing.
8. Remove the old clutch disc and pressure plate.
9. Inspect the flywheel and resurface it if necessary.
10. Install the new clutch disc and pressure plate.
11. Install the transmission bell housing.
12. Install the starter motor.
13. Install the driveshaft.
14. Install the brake calipers and rotors.
15. Install the front wheels.
16. Lower the car to the ground.
Tips:
* Be careful not to damage the clutch disc or pressure plate when installing them.
* Use a clutch alignment tool to ensure that the clutch disc is properly aligned with the flywheel.
* Tighten all bolts to the specified torque.
