Locate the spark plug caps on the right side of the engine.
Remove the spark plug caps by pulling them straight up.
Use a spark plug wrench to loosen and remove the spark plugs from the cylinder head.
Here is a more detailed guide:
1. Park your motorcycle on a level surface. Turn off the engine and allow it to cool down.
2. Locate the spark plug caps on the right side of the engine. The spark plug caps are usually black or red and have a wire attached to them.
3. Remove the spark plug caps by pulling them straight up. Be careful not to drop the spark plug caps into the engine.
4. Use a spark plug wrench to loosen and remove the spark plugs from the cylinder head. The spark plugs are located on the top of the cylinder head and have a metal electrode at the end of each one.
5. Remove the spark plugs are 18 mm.
6. Inspect the spark plugs for wear or damage. The spark plug electrodes should be clean and free of deposits. If the spark plugs are worn or damaged, they will need to be replaced.
7. Reinstall the spark plugs in the reverse order that you removed them. Tighten the spark plugs until they are snug.
8. Reinstall the spark plug caps.
9. Start the engine and check for any leaks or irregularities.
