1. Turn off the ignition.
2. Open the side cover and remove the battery cover.
3. Connect the positive (+) terminal of the battery charger to the positive (+) terminal of the battery.
4. Connect the negative (-) terminal of the battery charger to the negative (-) terminal of the battery.
5. Plug in the battery charger and turn it on.
6. Set the battery charger to the correct voltage and amperage for your battery.
7. Allow the battery to charge for the amount of time specified by the battery charger manufacturer.
8. Once the battery is charged, turn off the battery charger, disconnect the terminals, and replace the battery cover.
Here are some additional tips for charging a Suzuki Intruder battery:
* Make sure that the battery charger is compatible with the type of battery in your Intruder.
* Do not charge the battery for longer than the recommended time, as this can damage the battery.
* If the battery is not holding a charge, it may need to be replaced.
