Tools:
- Phillips head screwdriver
- Allen key or hex wrench
- Pliers
- Wire brush
Instructions:
1. Locate the battery: Remove the seat of your motorbike to locate the battery.
2. Disconnect the battery: Use a Phillips head screwdriver to loosen the terminals of the battery. Be careful not to let the terminals touch each other, as this could cause a spark.
3. Remove the battery: Use a wrench to loosen the bolts holding the battery in place. Remove the battery from your motorbike.
4. Clean the battery terminals: Use a wire brush to clean the battery terminals. This will help to improve the electrical connection and prevent corrosion.
5. Connect the new battery: Connect the new battery to the terminals, making sure that the positive terminal is connected to the positive wire and the negative terminal is connected to the negative wire.
6. Secure the battery: Replace the bolts and tighten them securely, then replace the seat.
7. Test the battery: Start your motorbike and check that the battery is working properly.
